Finding Clear-Cut Solutions For Residential plumbers

Helpful Plumbing Tips From The Pro's Who Know

The subject of plumbing is an interesting one! Plumbing involves a variety of specialized techniques, knowledge and equipment. With a little bit of effort, though, you can do your own plumbing as a way to save money with your DIY plumbing projects, even when the plumbing projects specific to your home might feel a little out of reach. The following hints and tips are designed to provide you with some of the information that you need to get started on developing your plumbing skills and knowledge.

Make sure you know where your home's water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.

If any water pipe that you have freezes, be sure to turn on the faucet that is closes to the pipe to give the water an exit as the pipe thaws. This can prevent damage to your house because it lets the pressure that is in the pipe out, and keeps it from bursting.

If you have a clogged drain, don't use cleaning chemicals to try to clear the clog. These harsh chemicals can corrode your metal pipes leading to leaks and broken pipes over time. Instead, stick to a plunger or make use of a plumbing snake to clear them.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet's tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

You can drastically reduce your utility bills with the installation of shower heads designed for better efficiency. Most of your water bills comes from the water you use to shower. Invest in an energy-efficient shower head and you could save a hundred dollar every year on your water bill.

When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn't read more work, try a chemical drain cleaner.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

Check with the Department of Consumer Affairs when shopping for a good plumbing contractor. By doing this you can see if they have any problems with their license and heck on reviews about the quality of their work. If a contractor's license has expired or isn't in good standing, you don't want to hire that contractor.

In the winter months, if you live somewhere where temperatures fall below freezing, leave your faucets on a little bit to let a thin stream of water through. This will help prevent the pipes from freezing, which could be a major problem for you and all the pipes in your home.

Beware of black water in your toilet tank. Chances are, the color is caused from too much magnesium or iron in your water. Although this is usually harmless, it can be annoying for some people. If it is iron or magnesium in your water, the only way to fix it is by filtering the water.

There are many skills and techniques to learn to become an accomplished plumber. Each home's plumbing system differs somewhat from others, so one thing that works in your home may be totally useless in another home. This advice can be the beginning of plumbing success.

How to get a decent plumber without going round the U-bend

Finding the valves

You can also search for reputable tradesmen in England and Wales via the Association of Plumbing and Heating Contractors (APHC) and in Scotland and Northern Ireland through SNIPEF.

John Thompson, the chief executive of the APHC, says there really is no need to stick with the first available plumber that you stumble on.

"If you feel pressurised into accepting work without a full explanation, have the confidence to question or get a second opinion. Also check if the tradesmen has the right credentials to work on your appliances," he says.

Mind you, if water is pouring, or even just dripping from the ceiling, you will need to try and isolate the problems to minimise damage before the plumber arrives.

For major leaks, turn off the water supply at the main stop tap, usually in the kitchen. You might need to resort to turning off the water company tap at the boundary of the property. Older ones may also turn off your neighbour's supply.

Smaller internal leaks can be stopped using local isolation valves - usually next to the appliance or tap concerned. These may be less familiar to older consumers as they take the form of levers or are just turned with a screwdriver.

On a combi boiler the isolation valve will be located underneath the boiler.

Ian Ruddick

Image caption,

Turning the thermostat up too suddenly can push your boiler over the edge, says Ian Puddick

Lagging

Ian Puddick is the founder of the London Boiler Company. His team is well used to being called out to replace worn out boilers which give up the ghost when they are pushed too hard.

"What happens is that all of a sudden people turn the thermostat up, but this pushes your boiler over the edge," he says.

"Also where you have tanks in the loft, check the little one to see that it's full of water. These can work with little in them for years, but when you turn the temperature up it drives the system a bit harder and then it stops."

Mr Puddick also has a helpful tip for avoiding a big freeze in your loft.

"Once you have checked all your pipes and tanks are lagged, protected and covered, check underneath the water tank. If there's some insulation there just pull it out and leave that area clear so heat can rise and protect the tank."

Emergency repairs are costly. So to avoid being fleeced by an opportunist plumber, it's worth getting your pipes and systems checked and serviced by a reputable engineer before temperatures drop once again.